How to Download and Install Official Samsung Galaxy S7 EDGE SM-G935F Stock Rom
How to Download and Install Official Samsung Galaxy S7 EDGE SM-G935F Stock Rom
If you own a Samsung Galaxy S7 Edge with model number SM-G935F and want to restore it to its original firmware, you can follow this guide to download and install the official stock rom for your device. Stock roms are the official software versions released by Samsung for their devices. They can help you fix software issues, bootloop problems, or unroot your device if you have previously rooted it.
Official Samsung Galaxy S7 EDGE SM-G935F Stock Rom
Before you proceed, make sure you have backed up your important data, as flashing a stock rom will erase everything on your device. You also need to have a Windows PC and a USB cable to connect your device to the PC. You will also need to download and install some tools and files on your PC, such as:
The official stock rom for Samsung Galaxy S7 Edge SM-G935F from SamMobile. You can choose the firmware version and region that matches your device. You will need to create a free account on SamMobile to download the firmware file.
Odin, a tool that allows you to flash firmware files on Samsung devices. You can download the latest version of Odin from XDA Developers.
Samsung Smart Switch, a software that allows you to backup and restore your data, as well as install the latest drivers for your device. You can download and install Samsung Smart Switch on your PC from Samsung's website.
Once you have downloaded and installed the above tools and files on your PC, you can follow these steps to flash the stock rom on your Samsung Galaxy S7 Edge SM-G935F:
Extract the firmware file that you downloaded from SamMobile. You should get a file with a .tar.md5 extension.
Run Odin as administrator on your PC.
Turn off your device and boot it into download mode by pressing and holding Volume Down + Home + Power buttons together for a few seconds. Release the buttons when you see a warning screen and press Volume Up to confirm.
Connect your device to your PC using a USB cable. Odin should recognize your device and show a blue or green box under ID:COM.
Click on the AP button in Odin and select the firmware file that you extracted earlier.
Make sure that only Auto Reboot and F. Reset Time options are checked in Odin. Do not check any other options or change any settings.
Click on the Start button in Odin to begin flashing the firmware file on your device. Do not disconnect your device or interrupt the process until it is finished.
Once the flashing process is completed, Odin will show a PASS message and your device will reboot automatically.
Disconnect your device from your PC and wait for it to boot up normally. You may see some initial setup screens that you need to complete.
Congratulations! You have successfully flashed the official stock rom on your Samsung Galaxy S7 Edge SM-G935F. You can now enjoy the original software features and performance of your device. 0efd9a6b88
https://www.admontalentos.com/group/grupo-admonbuen/discussion/56d3c058-a02e-4903-9f42-663a4f62478b